FOR IMMEDIATE RELEASE |
FUJI'S
NEW ANW-3500S
IN-LINE TWIN SPINDLE LATHE
IS ESPECIALLY SUITABLE FOR SHAFT
WORK
|
Vernon Hills, IL - New from Fuji, the twin spindle/twin tailstock ANW-3500S is
ideal for shaft turning
applications. The ANW-3500S handles heavier workloads,
larger machine envelopes and higher machine
powers and torques than Fuji's
ANW-3000, while coming with a lower price tag than the ANW-4100. Applications
for the ANW-3500S include drive pinions, CVTs, CVJs and outer races. The
dual spindles of the ANW-3500S operate at 15/20 HP power each (20/25 optional).
An A2-6 spindle
nose comes standard; an A2-8 spindle nose is available as
an option. The ANW-3500S features MT.4
tailstock, a quill stroke of 130mm
and a work size of 120mm x 250mm. FUJI
turns the machining of a part into process perfection. When you contact FUJI,
the part you will be
machining is analyzed by engineers with vast experience
in process and manufacturing engineering.
With the largest install base at
the major automotive manufacturers, FUJI engineers apply their
experience
with the FUJI machines that are built for automation from the ground up. These
highly
accurate machines employ built-in robotic automation, in-process auto
gauging for quality control,
and are engineered with the finest FUJI custom
workholding, all from one source. This
allows FUJI engineers to guarantee takt time, cycle time and CPK with turnkey
and run-off solutions
that are built for lean manufacturing. Using less manpower
and more automation, FUJI machines produce
the highest quality parts most
efficiently and reliably. FUJI solutions are supported by factory-trained
American
engineers 24/7. For
more information, log on to www.fujimachine.com
or contact
FUJI Machine America Corporation
171 Corporate Woods Parkway,
Vernon Hills, IL 60061, Phone: 847-821-7137,
Fax: 847-821-7815, email: info@fujimachine.com.
| 
